Some Basic Rules for Securing Your Internet of Things (IoT) Hardware
Most people have likely heard or read various reports about the impending doom from the proliferation of poorly-secured “Internet of Things” or IoT devices. Loosely defined as any gadget or gizmo that connects to the Internet but which most consumers probably wouldn’t begin to know how to secure, IoT encompasses everything from security cameras, routers, and digital video recorders to printers, wearable devices, robotic vacuum cleaners, and “smart” lightbulbs.
Attacks from massive botnets made up entirely of hacked IoT devices have many experts warning of a dire outlook for Internet security. But the future of IoT doesn’t have to be so bleak. Here’s a primer on minimizing the chances that your IoT things become a security liability for you or the Internet at large.
Rule #1: Avoid connecting your devices directly to the Internet — either without a firewall or in front of it, by poking holes in your firewall so you can access them remotely. Putting your devices in front of your firewall is generally a bad idea because many IoT products were simply not designed with security in mind and making these things accessible over the public Internet could invite attackers into your network. If you have a router, chances are it also comes with a built-in firewall. Keep your IoT devices behind the firewall as best you can.
Rule #2: If you can, change the thing’s default credentials to a complex password that only you will know and can remember. And if you do happen to forget the password, it’s not the end of the world: Most devices have a recessed reset switch that can be used to restore the thing to its factory-default settings (and credentials). Here’s some advice on picking better ones.we say “if you can,” at the beginning of Rule #2 because very often IoT devices — particularly security cameras and DVRs — are so poorly designed from a security perspective that even changing the default password to the thing’s built-in Web interface does nothing to prevent the things from being reachable and vulnerable once connected to the Internet. Also, many of these devices are found to have hidden, undocumented “backdoor” accounts that attackers can use to remotely control the devices. That’s why Rule #1 is so important.
Rule #3: Update the firmware. Hardware vendors sometimes make available security updates for the software that powers their consumer devices (known as “firmware). It’s a good idea to visit the vendor’s Web site and check for any firmware updates before putting your IoT things to use, and to check back periodically for any new updates.
Rule #4: Check the defaults, and make sure features you may not want or need like UPnP (Universal Plug and Play — which can easily poke holes in your firewall without you knowing it) — are disabled.If you want to know if something has poked a hole in your router’s firewall? Censys.io has a decent scanner that ma y give you clues about any cracks in your firewall. Browse to whatismyipaddress.com, then cut and paste the resulting address into the text box at Censys.io, select “IPv4 hosts” from the drop-down menu, and hit “search.” If that sounds too complicated (or if your ISP’s addresses are on Censys’s blacklist) check out Steve Gibson‘s Shield’s Up page, which features a point-and-click tool that can give you information about which network doorways or “ports” may be open or exposed on your network. A quick Internet search on exposed port number(s) can often yield useful results indicating which of your devices may have poked a hole. If you run antivirus software on your computer, consider upgrading to a “network security” or “Internet security” version of these products, which ship with more full-featured software firewalls that can make it easier to block traffic going into and out of specific ports. Alternatively, Glasswire is a useful tool that offers a full-featured firewall as well as the ability to tell which of your applications and devices are using the most bandwidth on your network. Glasswire recently came in handy to help determine which application was using gigabytes worth of bandwidth each day (it turned out to be a version of Amazon Music’s software client that had a glitchy updater).
Rule #5: Avoid IoT devices that advertise Peer-to-Peer (P2P) capabilities built-in. P2P. IoT devices are notoriously difficult to secure, and research has repeatedly shown that they can be reachable even through a firewall remotely over the Internet because they’re configured to continuously find ways to connect to a global, shared network so that people can access them remotely.
Rule #6: Consider the cost. Bear in mind that when it comes to IoT devices, cheaper usually is not better. There is no direct correlation between price and security, but history has shown the devices that tend to be toward the lower end of the price ranges for their class tend to have the most vulnerabilities and backdoors, with the least amount of vendor upkeep or support.
People who probably need to be reading these tips most likely won’t ever know they need to care enough to act on them. But at least by taking proactive steps, you can reduce the likelihood that your IoT things will contribute to the global IoT security problem.
|
